Edge Bandings


Edge Banding - a product with a high quality and wide range of sizes and abundance enables manufacturers to high-quality and well-finished variety of furniture panels.
Edge Bandings are made from various veneers, which depending on the required final thickness, is glued with particularly resistant polyurethane glues to each other, or strengthened with fleese fabric. Then, according to need are cut to the required width and usually twisted into rolls.
Standard thicknesses constantly supported stock is 0.5 mm and 1.5 mm, but there are other thick edges. Also were edges, which are coated with a layer of hot melt adhesives. As well as on demand edges can be tinted and varnished.
Key widths of 16, 22, 28, 32, 36, 42, 50, 55 mm. Available on demand and other non-standard thicknesses and widths.


Profiles "dressing" spliced veneers and edges


According to the harmonized needs of parameters produced edge (spliced veneers) for wooden profiles or other dressing. Additional grinding (up to 0,35mm) and high-quality veneer enables "coated" and even small-radius profiles. Also this product is used in furniture or door profiled edge pasting.