Adhesive 566.5 PUR white KLEIBERIT

KLEIBERIT Supracraft 566 is a permanently elastic, quick-drying, one-component polyurethane adhesive and sealing compound. Curing occurs by reaction with moisture. The adhesive is IMO-certified for use in shipbuilding.

Application:

• Bonding metal brackets for double flooring
• Bonding and sealing of metals, vanished sheets, wood, plastics, natural stone, ceramics, and masonry
• Bonding in shipbuilding (complying with IMO FTPC Part 5 and Part 2)

Benefits:

• Single component
• Paintable
• Non-corrosive
• Vibration absorption
• Remains resilient

KLEIBERIT 566 technical data:

Base: Polyurethane
Hardening: by reacting with moisture
Density: ~1.45 g/cm3
Available colours: black, white, and light grey
Consistency: paste-like
Temperature resistance: -40 °C ... +90 °C (trumpalaikis iki +120 °C)
Klijavimo temperatūra: +10 °C ... +35 °C
Time to film formation (open time): ~60 minutes (depending on ambient humidity and temperature)
Setting rate: at 23°C and 50% relative humidity: 3mm per day.

Resistance to chemicals:

• Long-term: water, salt water, sewage, aqueous cleaners, weak acids and alkalis.
• Short-term: petrol, alcohol, mineral oil, grease.
• Non-resistant: thinners and organic acids, concentrated acids and alkalis, alcohol, varnish thinner.

Mechanical properties:

Hardness according to DIN 53 505 (28 days at 23°C and 50% relative humidity): About 45 according to Shore A
Ultimate tensile strength (53 504): Approx. 1.8 N/mm2
Elongation at break (53 505): >600%
Tear resistance: >6N/mm2
Ability to regain its original shape (DIN EN ISO 7389): >70%
Allowable deformation (DIN EN ISO 10563): About 15%
Water vapour permeability (DIN EN ISO 53122): Approx. 2.000

Bonding:

Read the safety data sheets before bonding.

The parts to be glued must be clean and free of grease. We recommend using cleaner KLEIBERIT 820.0 to clean parts. (Make sure that the cleaner does not damage the materials). Smoked timber, such as smoked oak, must be ammonia free. Timber with a high oil content, such as exotic timber, must be checked before gluing. KLEIBERIT SupraCraft 566 is applied to one of the surfaces to be glued. If necessary, until a film is formed, the adhesive can be puttied with a trowel. Squeeze the parts together and lock in place.

Cleaning: Work tools must be cleaned immediately with a cleaner KLEIBERIT 820.0. Hardened adhesive can only be removed mechanically.