Veneered panels 
Decking boards 
Cladding boards 
Decking and cladding accessories 
Adhesive melt 
Contact glue 
Assembly adhesive 
PUR Glue 
PVA Glue 
Cleaners and other accessories 
Natural veneer 
Fine line veneer 
South American wood spieces 
African wood spieces 
American wood spieces 
Asian wood species 
European wood spieces 
Interior and exterior painted siding 
Blockboard 
MDF 
CB 
Plywood 
Veneered panels 
Flexible plywood Adhesive 502.8 polyurethane (D4) KLEIBERIT
Do you have any questions?
Contact us and we will help you| Product | Price for vnt (be PVM) | Quantity (vnt) |
|---|---|---|
|
Adhesive 502.8 polyurethane (D4) KLEIBERIT:
0.5 kg
Package size:
0.5 kg
|
- |
|
|
Adhesive 502.8 polyurethane (D4) KLEIBERIT:
32 kg
Package size:
32 kg
|
- |
|
|
Adhesive 502.8 polyurethane (D4) KLEIBERIT:
5 kg
Package size:
5 kg
|
- |
Thank you, your request has been sent
Fast polyurethane adhesive is designed for SIP bonding. Ideal for gluing composite materials and wood. Open time is up to 6 minutes.
KLEIBERIT 502.8 - extremely fast and elastic, moisture-hardening polyurethane adhesive. For gluing various materials to each other and to other materials. The open time of this adhesive is quite short ~ 6 - 8 minutes, the minimum pressing time depends on the materials to be glued, but it is not shorter than 17* minutes.
The adhesive is ideal for gluing composite materials. Filling materials can be hard polystyrene boards, hard polyurethane boards, phenolic resin with PVC, boards made of mineral and glass wool, and cellular boards. Covering materials can be laminates, primed aluminum sheets, plasterboard boards, reinforced gypsum boards, chipboards, OSB boards, and chip-cement boards. When gluing metals and plastics, due to the various mixtures available on the market, it is necessary to carry out test gluing.
Use:
Wear gloves when using adhesive. Surfaces to be glued must be clean, free of dust and grease. Metals, if they are not primed - roughed, degreased and primed. The adhesive can be applied directly from the bottle and, if necessary, spread with a notched trowel or brush. Close the package tightly immediately after use. This will preserve the adhesive for longer. The adhesive is applied to one of the surfaces to be bonded and the materials are strongly compressed ensuring good contact and a thin adhesive joint. You have a maximum of 8* minutes to apply the adhesive before pressing the parts. Minimum pressing time is 17* minutes. When gluing non-moisture materials, spray a mist of moisture (~20 g/m2) on the applied adhesive with a sprayer - remember that sprayed moisture reduces the open time of the adhesive to 3 minutes. The adhesive expands as it hardens. Hardened glue is easy to process and sand. Maximum bonding strength and resistance is achieved after 7 days.
Cleaning:
Uncured adhesives and tools can be cleaned with a cleaner KLEIBERIT 820.0. Hardened adhesives can be softened with a cleaner KLEIBERIT 822.5
