Adhesive 600.0 STP base (transparent) KLEIBERIT

Application

• For transparent seams, optically invisible bonding and sealing
• For elastic bonding of various materials, such as wood, glass, metal, plastic and mineral substrates
• Extremely versatile for construction, interior decoration and installation
• Installation and expansion joints in construction, windows, doors and flooring

Benefits

• clear
• phthalate-free
• isocyanate-free
• diluent-free
• silicone-free
• good initial adhesiveness
• high UV resistance
• robust and elastic
• paintable (due to the wide range of varnishing and painting systems available, pre-testing is required)
• virtually odourless
• operating temperature +5 - +35°C

Technical data of KLEIBERIT 600.0:

Base: STP
Density: ~1.01 g/cm3
Colour: Clear
Consistency: Paste-like
Time to film formation (open adhesive time): ~15+-5 minutes (depending on ambient humidity and temperature)
Adhesive setting rate at (20°C/50% RH): 2 - 3 mm per day.

Mechanical characteristics:

Hardness: ~ 35 - 40 according to Shore A
Ultimate tensile strength (527-3): ~1,0 -1,5 N/mm2
Elongation to rupture (527-3): 150%-200%

Bonding:

The glued parts must be clean and grease-free.
Test the adhesive with the materials to be bonded to see if the adhesion is adequate.
Three-sided adhesion should be avoided. In order to avoid three-sided adhesion, a round PE rope can be used.
After applying adhesive KLEIBERIT 600.0 on the surface to be glued, level it. Pay attention to the edges. Remove excess glue.

Do not use under water.

Cleaning:
Hardened adhesives can only be removed mechanically.