Adhesive 536.0 for stair treads KLEIBERIT

Please note: a special gun is required for dispensing this 2-component adhesive.

Application:

• Installation and assembly of stair treads, thresholds, window sills (wooden, stone, and metal)
• For visually invisible installation of stair treads (no screws required) on surfaces such as wood and wood products, stone, metal, and solid concrete.
• Ideal for staircase renovation where the treads are placed on top of old structures.

Benefits:

• Easy and user-friendly
• Available from + 10°C
• With one package (freely expandable to approx. 3.3 l), 2-3 standard size treads can be installed
• The stairs can be used after 20 minutes!
• Excess can be trimmed after 8-10 minutes
• Approximately 2 minutes to adjust

Use:

A special gun is required to bond the 2-component adhesive.
The surfaces to be glued must be strong and able to hold the expected loads. They must also be clean, non-greasy, and dry. When gluing on old surfaces, old paint and varnish must be sanded off.
When gluing steps, windowsills and thresholds, you need to provide supports between the step and the base, so that the adhesive has room to spread. The most optimal gap between the surfaces to be glued is 5-15 mm.
Glue is squeezed out every 8-10 cm, in strips. It is necessary to plan step compression for 15 minutes. Optimum stage compression with two weights of 15 kg each.

Packaging:

210 ml (250g) a squeeze bottle with two components. Cardboard box 16 pcs. x 210 ml.